Both Touch Buttons Trigger Inside or Outside SensorUpdated a year ago

Each touch button can be set to activate either Inside or Outside Sensor.

1. Open a touch button by removing the hex star screw at the bottom. The front of the button should be able to come off the backplate.
2. On the board inside, locate a small switch. This switch should have either the options Master (Inside) and Slave (Outside).
3. Set the switch to the desired sensor channel and reassemble the button.

Setting the button to Inside Sensor will enable it in Green Mode, Red Mode, or Pet Mode. Setting the button to Outside Sensor will enable it in Green Mode or Pet Mode (if Secure Pet Mode is turned off) only.