How to Set Up My AutoPlus GatewayUpdated 5 days ago
The AutoPlus Gateway is a Bluetooth-to-Ethernet bridge that serves as an accessory for an AutoSlide, MultiDrive, or AutoSwing system. This allows control of the system using the Autoslide app over the Internet, as opposed to over Bluetooth connection which is limited to within 100' of the door.
To use the AutoPlus Gateway,
- Your Autoslide system must be already connected to your Autoslide app account over Bluetooth.
- The AutoPlus Gateway must be installed within 100' of the Autoslide system. It is advisable to install the Gateway as close to the system as possible to increase signal strength.
A single AutoPlus Gateway can pick up multiple Autoslide systems within its detection range.
Instructions
Color Codes & Reset
Improving Signal
If the AutoPlus Gateway is showing poor signal strength when connecting to the Autoslide system, or if the AutoPlus Gateway is unable to connect to the Autoslide system, first attempt to reset and reconnect the Gateway following the instructions above.
Otherwise, the AutoPlus may need to be moved closer to the door in question. Options for this include purchasing a longer Ethernet cable, or using a third party powerline networking adapter. Powerline networking adapters permit Ethernet communication utilizing a powerline, and typically plug into a regular power outlet.
For multiple doors located at far distances from each other, multiple AutoPlus Gateways can be used for blanket coverage.
Tags: autoplus gateway bluetooth app internet ethernet iphone android wifi