All articles

Stays Open, When Activated Door Closes and ReopensUpdated a year ago

If the AutoSlide normally keeps the door fully open, and when activated closes then opens the door, it indicates the system is programmed in reverse.

Power the system off, move the door halfway open, and power the system back on. If the door immediately starts to open, power off the system. This confirms the door was programmed in the incorrect direction.

Reverse DIP switch #1, then power back on the system. It should now start to close the door. From here, the system should be oriented correctly. If it still continues to open when first powered on, contact AutoSlide support.

Was this article helpful?
Yes
No